October 23, 2020

Latest News

RSS Latest e-Bike News
  • Kevin’s Suzuki DR650, QS motor with 5-speed gearbox! July 17, 2021
    Kevin lives in a very hilly part of Georgia, and he just completed this conversion of a Suzuki DR650 from gas to electric. That by itself is really cool, but the thing that stands out about this build is that he put a lot of effort into being able to retain the stock 5-speed gearbox, […]
    spinningmagnets
  • 12 Ebikes that use a hubmotor as a non-hub July 4, 2021
    A direct drive hubmotor is affordable, simple, and robust. However, they turn at the same low speed as the drive-wheel. Electric motors perform best at higher RPM’s and that is why the most common hubmotors are geared, usually allowing the integrated motor to spin 5 times faster than the wheel. A common 26-inch bicycle wheel […]
    spinningmagnets
  • Agnius’ DIY longtail cargobike, from Lithuania June 21, 2021
    Agnius is from Lithuania, and he is best known for developing the N.E.S.E. battery pack building system. He recently build a longtail cargobike frame from scratch, and it had a few features that caught my eye. So let’s take a look. ______________________________________________ N.E.S.E Battery Modules We wrote about the N.E.S.E. battery system in 2017, and […]
    spinningmagnets
  • Denzel making an integrated motor with 4-speed gearbox. May 31, 2021
    Back in March of 2017, we wrote about Denzel, and they were retailing electric bikes that are made by the Eastgem company in China. You might want to take a quick scan of that article before you move on to these new products (click here). Denzel is an unusual company in that they are fairly […]
    spinningmagnets

Comments

A WordPress Commenter

Hi, this is a comment.
To get started with moderating, editing, and deleting comments, please visit the Comments screen in the dashboard.
Commenter avatars come from Gravatar.

Leave a Reply

Your email address will not be published. Required fields are marked *